Supercardioid Condenser Handheld Transmitter Microphone (LCD). Freq. 5ND
Robust, lightweight plastic housing.
The unique multi-layered metal grille protects the capsule against impact, rolling and pop noise, ensuring clarity of sound.
Interchangeable capsule module with premium condenser or dynamic options for easy and fast changeovers.
Premium condenser capsules exhibit high fidelity, wide dynamic range, fast transient responses, good feedback rejection, accurate sound image characteristics, transparent sound quality and withstand maximum SPL.
Reversible end-cap allows power on/off switch being locked to avoid accidental power-off during performance.
Impact-resistant battery compartment holds 2 AA batteries.
Backlit LCD displays various parameters and status.
Stable PLL circuits. Automatically synchronized with the receiver’s frequency by MIPRO’s patented ACT™ function.
Patented “built-in” antenna design.
Interchangeable colored rings for microphone channel identification on stage.
High-efficiency circuitry design provides more than 16 hours of operation from 2 AA batteries (depending on the battery quality).
Specifications:
Frequency Range UHF 480 – 934 MHz
Bandwidth 24 MHz
Oscillation Mode PLL Synthesized
Channel Set-Up ACT Sync
RF Output Power 10mW / 30mW (switchable)
Spurious Emissions < -55 dBc
LCD Display Group, Channel, Battery status & error codes
Max. SPL 140 dB SPL
Battery Type 2 AA alkaline
Operating Time Min. 12 hours (Low Power)
Current Consumption Approx. 92 mA
Dimensions (Ø × L) 51 × 234 mm / 2 × 9.2 "
Net Weight Approx. 251 g / 8.9 oz
Miniature Bodypack Transmitter with XLR connector freq. 5ND
Lightweight, compact size with sturdy plastic housing.
On the top features mute switch, mini-XLR connector and antenna.
Backlit LCD displays various parameters and status.
Innovatively designed battery cover allows easy access to operate buttons and prevents accidental operation.
Mute button with remote-control jack for easy activation of mute function.
Stable PLL circuits. Automatically synchronized with the receiver’s frequency by MIPRO’s patented ACT™ function.
Can directly match to high-low input impedance for microphone or guitar without switching.
Mini-XLR input with secure screw lock connector for lavaliere / headworn mics and guitar.
Adjustable belt clip allows wearing transmitter in up or down position.
High-efficiency circuitry design provides 12~14 hours of operation from 2 AA batteries (depending on the battery quality).
SPECIFICATIONS
Frequency Range UHF 480 – 934 MHz
Bandwidth 24 MHz
Oscillation Mode PLL Synthesized
Channel Set-Up ACT Sync
RF Output Power 10 mW / 30 mW (switchable)
Deviation < ± 40 kHz
Spurious Emissions ? -55 dBc
LCD Display Group, Channel, Frequency, AF gain, Frequency band, RF power, Mute mode, Lock status, Battery status and error codes
Max. Input Level 0 dBV
Mute Connector Optional MJ-70 remote mute switch
Battery Type 2 AA alkaline
Operating Time Min. 12 hours
Current Consumption High Power: approx. 161 mA ; Low Power: approx. 120 mA
Dimensions (W × H × D) 63 × 82 × 22 mm / 2.5 × 3.2 × 0.9 "
Net Weight Approx. 83 g / 2.9 oz
Full rack Quad-channel Diversity Receiver (metal case). Frequency 5ND
EIA standard 1U metal receiver.
Receiver provides bias for booster where MIPRO antenna systems can be added for extended receiving range and stability.
Backlit LCD displays group, channel, frequency, RF level, antenna selection, AF level, battery level indicator, interference warning indicator, and panel lock indicator.
A lit green light indicates a working mode when receiver detects an incoming signal or buttons touched. Light dims automatically when receiver is idle for about 10 seconds.
Balanced XLR / unbalanced 1/4 » audio output jack, output level switch and DC input are on the rear panel. One mixed-output switch is available for quad-channel receivers.
High efficiency and low spurious PLL circuitry with Auto Scan functioin. Each receiver is presets with 11 groups, Groups 1~6, 7~10 have 8 &16 compatible channels respectively. Up to 8 channels in group 11 can be saved and recalled within 961 user-defined frequencies. A total of 112 preset channels per band.
World’s first ACT™ function provides precise and rapid frequency sync to the transmitters.
Advanced diversity technology for optimum reception range and reduces signal dropouts and the “PiloTone & NoiseLock” dual-squelch circuits prevent noise interference.
Adjustable ‘SQ’ for higher sensitivity to increase receiving distance and lower sensitivity to reduce interference.
Industry’s only RF interference warning indicator for ideal SQ level adjustment.
DC input socket accepts 12~15V power supply.
Matching ACT-32H handheld and ACT-32T bodypack transmitters (sod seperately).
SPECIFICATIONS
Channel: Quad
Chassis : EIA-Standard 19″ 1U
Receiving Mode: Diversity
Frequency Range: UHF 480~934MHz
Antenna : Rear Panel. Detachable.
Preset Channels: 112 preset channels.
Group 1-6: 8 compatible channels in each group.
Group 7-10: 16 compatible channels in each group.
Group 11: Up to 8 channels can be saved & recalled.
961 user-defined frequencies in group 11.
Oscillation Mode: PLL Synthesized, Frequency Stability?±0.005% (-10~+60?)
Sensitivity: 10dBµV, at S/N>80dB
S/N Ratio: >106dB(A)
T.H.D. : <0.5% @ 1kHz
Frequency Response: 50Hz~18kHz, with high pass filter.
Squelch: "PiloTone & NoiseLock" dual-squelch circuit.
Audio Output Adjustment: Output level accurately pre-adjusted to equal to the microphone capsule sensitivity.
Maximum Output Level: 2-level Switch: Line & Mic
Power Supply: External AC Adapter, 12~15V DC, 1A
Dimensions: 210(W)×44(H)×180(D)mm / 8.3(W)x1.7(H)x7.1(D)"
Weight: Approx. 0.95kg / 2.1lbs
Note
Refer to actual product in the event of product discrepancy.
Frequency range and maximum deviation comply with the regulations of different countries.