Episode® Electronics Émetteur IR Double avec Confirmation DEL (Sac de 10)
Episode Electronics Dual IR Flasher with LED Feedback
Compact size for easy installation
Episode IR flashers are some of the smallest on the market and can be installed virtually anywhere.
Adhesive backed
Each flasher is backed with self-adhesive tape to allow installation to any solid surface.
LED Feedback
Each IR flasher has a visible LED that indicates when it is transmitting an IR signal allowing for easy troubleshooting of the system.
Compatible with Virtually any IR Repeater
Each IRF-2 has a 3.5mm plug for easy connection to most IR repeaters including the Episode IR1X4 and IR2X6
IR Flasher Covers Included
Each IRF-2 comes with two convenient adhesive backed flasher covers to control IR flasher emissions.
3 Year Warranty
The Episode IRF-2 durable design will provide years of trouble free operation.
Specifications:
3/8″ x 1″ x 3/8″
(2) Flashers with one 1/8 in. MONO Jack with 2-Conductor Wire
10 ft. of Cable
(2) Flasher Covers
Additional Double-Sided Tape
Episode® Electronics IR Flasher Cover (10 Pack)
Episode® Electronics IR Flasher Cover
Isolate Your IR Signal
Prevents unwanted IR signals from entering the sensor window of IR controlled equipment.
Prevent Signal Flooding
Prevents IR flasher signals from escaping and flooding the sensors of other nearby IR controlled equipment.
Sticks To Most Surfaces
The cover is designed with soft rubber neoprene to allow flexiblity to adhere to most surfaces.
Small In Size, Big In Solutions
Just under an inch in length for the flexibility needed to install it just about anywhere.
Episode® 650 Série Commercial H-P SS-Grave 8po 70V plafond avec tige plafond (Un)
UL1480: Oui
UL2043 (Plenum): Oui
Basse: 6.5″ Vacuum-formed, mica-filled polypropylene
Basse Voice Coil: 1.2″ Copper on Aluminum Bobbin
Aigu: 1″ Dome wn Soie avec aimant Neodynium refroidi au Ferro-fluid
Puissance RMS (w) @ Basse Impédance: 60w
Puissance Instantanée (w) @ Basse Impédance: 120w
70v Opération: Oui
70v Ajustements: 7.5w, 15w, 30w, 60w
100v Ajustements: 15w, 30w, 65w
Basse Impédance Direct: Oui
Amplificateur Recommendé Puissance Min @ Basse Impédance: 15W
Nominal Impédance – Mode Direct (O): 8 Ohms
Réponse Fréquence (- 3dB): 60Hz – 20kHz
Sensibilité (2.83v @ 1m): 87 db
Angle Dispersion: 110°
Diamètre Trou: 9.7 po.
Profondeur après tuile de 5/8″ : 8.2 po
Tige pour plafond Inclus: Oui
Poids: 5.8 lbs
Garantie: À vie
Binary™ Two Cat 5e/6 HDMI 1.3 Extender (130 Ft.)
Specifications
Specifications Transmitter Receiver
Video Bandwidth Single-link 225MHz (6.75Gbps)
Video Support 480i / 480p / 720p / 1080i / 1080p up to 36-bit color
HDMI over UTP Transmission (24-bit) Full HD (1080p)-130ft (CAT5e) / 165ft (CAT6)HD (720p/1080i)- 164ft (CAT5e) / 200ft (CAT6)
Audio Support Surround sound (up to 7.1ch) or stereo digital audio
Signal Equalization 8-level digital control at RX
Input TMDS Signal 1.2 Volts (peak-to-peak)
Input DDC Signal 5 Volts (peak-to-peak, TTL)
Input 1x HDMI 2x RJ45
Output 2x RJ45 1x HDMI
HDMI Connector Type A (19-pin female)
RJ45 Connector WE/SS 8P8C 2 LED indicators
Rotary Control Switch – Signal level
Mechanical
Housing Metal enclosure
Dimensions Width: 3.6″ Height: 0.9″ Depth: 3.3″
Weight .77 lbs
Power Supply 5V 4A DC
Power Consumption 1.5 Watt (max)
Max. Recommended Length 1080i 1080p
Cat 5e 164 ft. (50 meters) 130 ft. (39.62 meters)
Cat 6 200 ft. (60.96 meters) 165 ft. (50.29 meters)
Episode® 650 Séries Comm 70V H-P Suspendu Basse 4 po. Attache inclus (Noir | Ch)
Spécifications
UL1480: Oui
Basse: 4″ Vacuum-formed, Mica-Filled Polypropylene
Basse Voice Coil: 1.2″ Cuivre sur bobine Aluminium
Aigu: 1″ Dome en soie avec aimant Néodynium refroidi Ferro-fluide
Puissance RMS (w) @ basse Impédance: 40w
Puissance Max/Pointe (w) @ Basse Impédance: 80w
70v Operation (Oui/Non): Oui
70v Tap: 3.75w, 7.5w, 15w, 30w
100v Tap: 7.5w, 15w, 30w
Sélection Basse Impédance Direct: Oui
Amplification Recommandé @ Basse Impédance: 15W
Impédance Nominal – Mode Direct (O): 😯
Réponse Fréquence (- 3dB): 65Hz – 20kHz
Sensibilité (2.83v @ 1m): 84 db
Angle Dispersion: 130°
Poids: 6.0 lbs
Dimensions (Diam x H): 8.9″ x 9.1″
Système Suspension: Ensemble d’attache avec cable de 10pi
Garantie: À vie