Wirepath™ Surveillance Série 550 Caméra Dome IP Extérieur avec IR (1MP 720p | Blanc)
Specifications
Imaging
Image sensor 1MP
Lens Type 2.8mm Mega Pixel Fixed Lens F1.8
Estimated Viewing Angle 82.9°(H), 51.9°(V)
Video Resolution 1280×800@30fps, 1280×720@30fps, 640×480@30fps, 320×240@30fps, 176×144@30fps
Minimum Illumination 0.1 lux @F1.8 (IR off)
0 lux @F1.8 (IR on)
Shutter Speed 1/10~1/1000
True Day/ Night (IR Cut Filter) Yes
IR 50 ft
Technology
Image Adjustment Brightness, Contrast, Hue, Saturation, Sharpness, Shutter Speed adjustable, AGC, Sense-Up, D-WDR, Noise reduction, Day&Night adjustable
AGC Yes
Sense Up Yes
Digital WDR Yes
DNR 2D DNR
Sense Up Yes
Flip Yes
Mirror Yes
Shutter Speed Adjustable Yes
Day&Night Adjustable Yes
Quad Streaming Yes
Image Snapshot Yes
Full Screen Monitoring Yes
Privacy Mask Yes
Lens Distortion Correction Yes
Fog Cutter Yes
Tampering Resistance Yes
Video Compression format H.264/M-JPEG
Video Bitrates CBR, VBR
Motion Detection Yes
Actions upon Triggers Email, FTP, Save to micro SD card, SAMBA
Pre/Post Alarm Yes
Security Password protection, IP address filtering, HTTPS encrypted data transmission, QoS/DSCP
Simultaneous Connections / Users Up to 10
Network
Ethernet 10/100 Base-T
Network Protocol HTTP, HTTPS, SNMP, QoS/DSCP, Access list,
RTSP, TCP/ IP, UDP, SMTP, FTP, PPPoE,
DHCP, DDNS, NTP, UPnP, 3GPP, SAMBA, Bonjour
Input/Output Ports
Video Test Port Yes
Setup Power Port Yes
On Pigtail DC-jack
male RJ45
Backup Management
Recording Triggers Motion Detection, IP Ping failure, Network disconnect, Schedule, Tampering
microSD Card Support Yes, up to 32GB(Class 10)
Client System Requirement
OS Windows 7, Microsoft IE 11.0 or above
Mobile Support iOS 4.3 or above, Android 1.6 or above.
Hardware Suggested:
Intel Dual Core 2.53G
RAM: 1024MB
Graphic card: 128MB Minimum:
Intel-C 2.8G
RAM: 512MB
Graphic card: 64MB
Housing & Power
Operating Temperature 14°F ~ 113°F
Dimensions Width: 5.91″ Height: 4.04″
Weight 2.18 lbs
Weather Rating IP66
Vandal Resistant Yes
Side Conduit Threading ‘3/4’ NTP
POE / Consumption Yes – PoE IEEE 802.3af
3.36W 70mA(IR Off) / 4.8W 100mA(IR On)
12VDC Power Consumption 2.04W 170mA(IR Off) / 3.72W 310mA(IR On)
Certifications
ONVIF Yes
CE, FCC, RoHS Yes
Wirepath™ Surveillance Série 365 Camera Bullet Analogue Extérieur avec IR (650 TVL | Gris)
Imaging
Image Sensor 960H 1/3″ Color Sony Super HAD II
Lens 2.8 ~ 12mm Varifocal Auto Iris Lens
Estimated Horizontal Viewing Angle 92 ° (W) ~ 30 ° (T)
Resolution (TVLs) 650
Effective Pixels NTSC:976(H)x494(V)
Gamma 0.45
S/N Ratio >50dB
Sync Mode Internal
Scanning System 2:1 Interlace
IR Range 65 ft.
Smart IR Yes
Auto Iris Yes
Technology
Minimum Illumination 0.01 Lux color, 0 Lux IR on
DNR – 2D DNR Yes
Auto Gain Control Yes
Back Light Compensation Yes
White Balance Yes
Housing & Power
Weather Rating IP66
Operating Temperature 14°F – 140°F
Operating Humidity 30% ~ 80% RH
Power Source 12 VDC (500 mA)
Power Consumption 3.6W – 300mA
Dimensions Arm 90° – Width: 3.4″ Height: 3.82″ Depth: 8.39″
Arm Straight – Width: 3.4″ Height: 3.28″ Depth: 9.07″
Weight 1.70 lb. (770g)
Wirepath™ Telephone Expansion Module w/ Sixteen RJ45 Jack Connections and Loop IN/OUT for Expansion
Wirepath™ Telephone Expansion Module w/ Sixteen RJ45 Jack Connections and Loop IN/OUT for Expansion
The Wirepath™ WP-MOD-RJ45-TELEP16 allowis all 4 telphone lines to expand to an additional 16 Telephone connection ports. Also, its designed as an expansion module for the WP-MOD-RJ45-TEL1X12. Without a security interface the module can be used as a base telephone module as well as an expansion using one of the two IN/OUT RJ45 jacks.
Use As a Base Telephone Module or Expansion Module
Great for using as a base telephone module or use a short jumper cable to expand the WP-MOD-RJ45-Tel1X12. Now that’s flexibility.
Designed To Fit Most Structured Wiring Cans
Designed with universal mounting capability that allows you to use this in almost every structured wire can.
Expands In Multiples of 16
All 4 telephone lines in a Cat5e cable can expand to an additional 16 telephone expansion ports.
Industry Standard Simplicity
Terminate your cables with TIA 568B and you will have no problems with your signals. In addition the back of each module has a Pin-Out diagram to assist terminations in the 568B standard.
1×8 Tele Expansion for Distributing 4 line to 8 Add Location
Wirepath™ 1×8 Telephone Expansion Module for Distributing Four Lines to Eight Additional Locations
The WP-MOD-TELEXP8 is a convenient expander for either the WP-MOD-COMBOVT or WP-MOD-TEL1X6 modules. It provides termination for up to 4 lines for telephone in up to 8 rooms. Standard color-coded .110 punch down terminals and RJ-45 expansion ports make this a fast installation.
Fits most cans.
The WP-MOD-TELEXP8 has universal mounting capability that allows you to use this in almost every structured wire can.
Fast expansion.
The expansion port allows simple and quick telephone daisy-chains using additional WP-TELEXP8 modules.
Industry standard simplicity.
Terminals are color-coded for fast and easy punch down.
Specifications:
6.5″ (with tabs) x 2.75″ x 1″
RoHS Compliant
Wirepath™ Passive 1×8 Video Distribution Module
Wirepath™ 1×8 Telephone Expansion Module for Distributing Four Lines to Eight Additional Locations
The WP-MOD-TELEXP8 is a convenient expander for either the WP-MOD-COMBOVT or WP-MOD-TEL1X6 modules. It provides termination for up to 4 lines for telephone in up to 8 rooms. Standard color-coded .110 punch down terminals and RJ-45 expansion ports make this a fast installation.
Fits most cans.
The WP-MOD-TELEXP8 has universal mounting capability that allows you to use this in almost every structured wire can.
Fast expansion.
The expansion port allows simple and quick telephone daisy-chains using additional WP-TELEXP8 modules.
Industry standard simplicity.
Terminals are color-coded for fast and easy punch down.
Specifications:
6.5″ (with tabs) x 2.75″ x 1″
RoHS Compliant