Small and smart 2-fold switched and metered PDU<\/p>\n
Expert Power Control 1121-6 for more operational security and energy efficiency in small installations<\/p>\n
– Demonstrably fewer and shorter outages of your critical IT and AV infrastructure
\n– Very compact housing design allows space-saving integration even in confined AV environments such as media furniture
\n– Detect AV and IT problems at an early stage: Proactive power and environment monitoring
\n– Measurably increased energy efficiency (Green IT and AV): Electricity cost and CO2 savings through controlled switching off of devices
\n– Integrate anywhere: Quickly and easily integrate anywhere with API interface: REST API, HTTPS, SNMP, Telnet and MQTT
\n– Fix AV and IT problems quickly and effectively: Remote reboot or with the self-healing function (automatic restart) thanks to integrated watchdogs<\/p>\n
Key Features
\n Simple and quick mounting even in the smallest AV installation
\n\tEvent and schedule controlled switching
\n\tSelf-healing function
\n\tPrecise current metering of up to 9 electrical units
\n\tConnector for plug-and-play sensors
\n\tLightweight and robust plastic housing
\n\tHybrid surge protection (SPD type 3)<\/p>\n
Switching function
\n\tEach power port can be switched via HTTP(S), SNMP, ModbusTCP or command line interface via Telnet, SSH or MQTT
\n\tProgrammable on\/off sequences for remote reboots (Remote Reboot)
\n\tPower ports can be switched when preset sensor thresholds are exceeded
\n\tSelf-healing function thanks to 2-channel watchdog: Each power port can be assigned its own Watchdog (ICMP\/TCP), Which initiates a fully automatic restart if necessary
\n\tSwitching state and switch-on delay up to 9999 seconds (166 minutes) individually adjustable for each output port after power failure
\n\tCurrent peaks due to increased inrush currents are automatically prevented by sequential switch-on with a latency of 1 second<\/p>\n
Metering function
\n\tPower consumption metering (kwH) with 2 energy counters: one counter counts consistently, the other counter is resettable
\n\tMetering of current (A), voltage (V), phase angle, power factor, frequency (Hz), active power (W), apparent power (VA) and reactive power (VAr)
\n\tConnector for combined plug-and-play sensors (temperature, humidity and air pressure) to prevent often occurring physical hazards like overheating and increased humidity or air pressure<\/p>\n
Security
\n\tIntegrated type 3 surge protection (SPD) prevents damage to the device and connected loads
\n\tLong-life High-Inrush Relays prevent welding of relay contacts during inrush current peaks
\n\tGeneration of status messages and alarms (e-mail, syslog, SNMP traps MQTT, SSH, Telnet)
\n\tEncrypted e-mails (SSL, STARTTLS)
\n\tAccess protection by IP access control
\n\tEncrypted communication through SSL (TLS 1.1, 1.2, 1.3) and SSH
\n\tPassword protected access
\n\tBeeper for audible alarm when sensor limits are exceeded\/deceeded<\/p>\n
Operation
\n\tEasy-to-read LEDs displaying switching status of outlets and device status
\n\tFirmware update via Ethernet during operation (no restart required)
\n\tSimple and flexible configuration via web browser, Windows or Linux program
\n\tDynamic assignment of an IP address via DHCP or manual assignment of static IP address
\n\tRapid commissioning thanks to free and reliable drivers from our technology partners<\/p>\n
Technical Details
\n\tIntegrated type 3 overvoltage protection (L-N, L\/N-PE), status retrievable via network
\n\tHigh-inrush relay: max. 4 sec: 30 A \/max. 20 ms: 80 A
\n\tMeasurement of key electrical parameters: current (A), voltage (V), phase angle, power factor, frequency (Hz), active power (W), apparent power (VA) and reactive power (VAr)
\n\tEncrypted communication through SSL (TLS 1.1, 1.2, 1.3) and SSH
\n\tLxDxH: 168 x 86 x 34 mm (without mounting brackets)
\n\tWeight: approx 450 g
\n\tOperating temperature: 0-45 \u00b0C
\n\tStorage temperature: -20 – 70 \u00b0C
\n\tRelative humidity: 0 – 95 % (non condensing)<\/p>\n
Electrical Connections
\n\t1 power supply IEC C14 (max. 10 A, 230 V)
\n\t2 power ports IEC C13 (max. 10 A)
\n\t1 Ethernet connector RJ45 (10\/100 Mbit\/s)
\n\t1 sensor connector (RJ45) for plug-&-play sensors<\/p>\n","protected":false},"excerpt":{"rendered":"
Small and smart 2-fold switched and metered PDU<\/p>\n
Expert Power Control 1121-6 for more operational security and energy efficiency in small installations<\/p>\n
– Demonstrably fewer and shorter outages of your critical IT and AV infrastructure
\n– Very compact housing design allows space-saving integration even in confined AV environments such as media furniture
\n– Detect AV and IT problems at an early stage: Proactive power and environment monitoring
\n– Measurably increased energy efficiency (Green IT and AV): Electricity cost and CO2 savings through controlled switching off of devices
\n– Integrate anywhere: Quickly and easily integrate anywhere with API interface: REST API, HTTPS, SNMP, Telnet and MQTT
\n– Fix AV and IT problems quickly and effectively: Remote reboot or with the self-healing function (automatic restart) thanks to integrated watchdogs<\/p>\n
Key Features
\n Simple and quick mounting even in the smallest AV installation
\n\tEvent and schedule controlled switching
\n\tSelf-healing function
\n\tPrecise current metering of up to 9 electrical units
\n\tConnector for plug-and-play sensors
\n\tLightweight and robust plastic housing
\n\tHybrid surge protection (SPD type 3)<\/p>\n
Switching function
\n\tEach power port can be switched via HTTP(S), SNMP, ModbusTCP or command line interface via Telnet, SSH or MQTT
\n\tProgrammable on\/off sequences for remote reboots (Remote Reboot)
\n\tPower ports can be switched when preset sensor thresholds are exceeded
\n\tSelf-healing function thanks to 2-channel watchdog: Each power port can be assigned its own Watchdog (ICMP\/TCP), Which initiates a fully automatic restart if necessary
\n\tSwitching state and switch-on delay up to 9999 seconds (166 minutes) individually adjustable for each output port after power failure
\n\tCurrent peaks due to increased inrush currents are automatically prevented by sequential switch-on with a latency of 1 second<\/p>\n
Metering function
\n\tPower consumption metering (kwH) with 2 energy counters: one counter counts consistently, the other counter is resettable
\n\tMetering of current (A), voltage (V), phase angle, power factor, frequency (Hz), active power (W), apparent power (VA) and reactive power (VAr)
\n\tConnector for combined plug-and-play sensors (temperature, humidity and air pressure) to prevent often occurring physical hazards like overheating and increased humidity or air pressure<\/p>\n
Security
\n\tIntegrated type 3 surge protection (SPD) prevents damage to the device and connected loads
\n\tLong-life High-Inrush Relays prevent welding of relay contacts during inrush current peaks
\n\tGeneration of status messages and alarms (e-mail, syslog, SNMP traps MQTT, SSH, Telnet)
\n\tEncrypted e-mails (SSL, STARTTLS)
\n\tAccess protection by IP access control
\n\tEncrypted communication through SSL (TLS 1.1, 1.2, 1.3) and SSH
\n\tPassword protected access
\n\tBeeper for audible alarm when sensor limits are exceeded\/deceeded<\/p>\n
Operation
\n\tEasy-to-read LEDs displaying switching status of outlets and device status
\n\tFirmware update via Ethernet during operation (no restart required)
\n\tSimple and flexible configuration via web browser, Windows or Linux program
\n\tDynamic assignment of an IP address via DHCP or manual assignment of static IP address
\n\tRapid commissioning thanks to free and reliable drivers from our technology partners<\/p>\n
Technical Details
\n\tIntegrated type 3 overvoltage protection (L-N, L\/N-PE), status retrievable via network
\n\tHigh-inrush relay: max. 4 sec: 30 A \/max. 20 ms: 80 A
\n\tMeasurement of key electrical parameters: current (A), voltage (V), phase angle, power factor, frequency (Hz), active power (W), apparent power (VA) and reactive power (VAr)
\n\tEncrypted communication through SSL (TLS 1.1, 1.2, 1.3) and SSH
\n\tLxDxH: 168 x 86 x 34 mm (without mounting brackets)
\n\tWeight: approx 450 g
\n\tOperating temperature: 0-45 \u00b0C
\n\tStorage temperature: -20 – 70 \u00b0C
\n\tRelative humidity: 0 – 95 % (non condensing)<\/p>\n
Electrical Connections
\n\t1 power supply IEC C14 (max. 10 A, 230 V)
\n\t2 power ports IEC C13 (max. 10 A)
\n\t1 Ethernet connector RJ45 (10\/100 Mbit\/s)
\n\t1 sensor connector (RJ45) for plug-&-play sensors<\/p>\n","protected":false},"featured_media":0,"template":"","meta":{"_acf_changed":false,"inline_featured_image":false,"ep_exclude_from_search":false},"product_brand":[6434],"product_cat":[6301],"product_tag":[765],"class_list":{"0":"post-207839","1":"product","2":"type-product","3":"status-publish","5":"product_brand-gude","6":"product_cat-non-categorise","7":"product_tag-nouveaute","9":"first","10":"instock","11":"taxable","12":"shipping-taxable","13":"purchasable","14":"product-type-simple"},"acf":[],"yoast_head":"\n