Episode\u00ae Electronics Surface Mount Plasma\/LED-Proof IR Sensor with LED Feedback
\nThis surface mount IR receiver packs the most desired features into a compact, easy-to-hide form factor. Its fine-tuned IR frequency is now between 30-60kHz, so your signal is always on and free from pesky interference. Plus, it\u2019s resistant to plasma\/LCD display interference and supports broadband IR and compressed codes, meaning that it can handle even the toughest devices – like AT&T U-verse boxes. <\/p>\n
Universal Acclaim
\nThis sensor works with virtually all A\/V components and remote controls \u2013 even AT&T U-verse! This is thanks to wideband IR capability (30-60kHz) and support of RCMM compressed codes. <\/p>\n
Advanced IR Filtering Technology
\nIn addition to blocking common interference from plasma and LCD displays, it is also resistant to sunlight, Compact Fluorescent Lamps (CFL), Electro-Magnetic Interference (EMI), and Electrostatic Interference (ESI). Best of all, it has the “smarts” to do all this without impacting reception and performance. <\/p>\n
Going The Distance
\nThis Episode IR receiver features dual diodes for long-range reception up to 40 feet and off-axis response up to 30 degrees in any direction.
\nNOTE: IR distance is dependent on remote strength and ambient noise conditions. <\/p>\n
Compact Size
\nThis low-profile IR receiver is the perfect fit to newer flat panel LCD TVs. At only 1\/3″ deep and with a solid black finish, it is able to “hide” in plain sight. <\/p>\n
Talkback LED
\nA talkback LED blinks when receiving IR or interference. This is ideal when troubleshooting and is equally as valuable to the end-user as visual confirmation that the IR is being received. <\/p>\n
Integrated Wire Channel
\nLocated on the back of the IR receiver is a recessed channel that keeps the wire tucked in and allows it to exit from the left, right, or straight through the back. <\/p>\n
Adhesive Backing
\nWith its peel and stick adhesive backing, this compact IR receiver can easily be applied to the front of a flat panel display, cabinet or just about anywhere. <\/p>\n
Specifications
\nPower:\t+12VDC @ 25MA
\nMaximum recommended cable length:\t1000′ with CAT 5 cables
\nCarrier frequency acceptable range:\t30khz to 60khz
\nControl range:\t4′ to 40′ without speaker grille
\n2′ to 28′ with speaker grille
\n*Actual range depends on signal strength and ambient noise conditions.
\nControl angle:\t0+\/- 45\u00b0 off axis
\nDimension:\t0.68″ H x 2.55″ W x 0.39″ D<\/p>\n","protected":false},"excerpt":{"rendered":"
Episode\u00ae Electronics Surface Mount Plasma\/LED-Proof IR Sensor with LED Feedback
\nThis surface mount IR receiver packs the most desired features into a compact, easy-to-hide form factor. Its fine-tuned IR frequency is now between 30-60kHz, so your signal is always on and free from pesky interference. Plus, it\u2019s resistant to plasma\/LCD display interference and supports broadband IR and compressed codes, meaning that it can handle even the toughest devices – like AT&T U-verse boxes. <\/p>\n
Universal Acclaim
\nThis sensor works with virtually all A\/V components and remote controls \u2013 even AT&T U-verse! This is thanks to wideband IR capability (30-60kHz) and support of RCMM compressed codes. <\/p>\n
Advanced IR Filtering Technology
\nIn addition to blocking common interference from plasma and LCD displays, it is also resistant to sunlight, Compact Fluorescent Lamps (CFL), Electro-Magnetic Interference (EMI), and Electrostatic Interference (ESI). Best of all, it has the “smarts” to do all this without impacting reception and performance. <\/p>\n
Going The Distance
\nThis Episode IR receiver features dual diodes for long-range reception up to 40 feet and off-axis response up to 30 degrees in any direction.
\nNOTE: IR distance is dependent on remote strength and ambient noise conditions. <\/p>\n
Compact Size
\nThis low-profile IR receiver is the perfect fit to newer flat panel LCD TVs. At only 1\/3″ deep and with a solid black finish, it is able to “hide” in plain sight. <\/p>\n
Talkback LED
\nA talkback LED blinks when receiving IR or interference. This is ideal when troubleshooting and is equally as valuable to the end-user as visual confirmation that the IR is being received. <\/p>\n
Integrated Wire Channel
\nLocated on the back of the IR receiver is a recessed channel that keeps the wire tucked in and allows it to exit from the left, right, or straight through the back. <\/p>\n
Adhesive Backing
\nWith its peel and stick adhesive backing, this compact IR receiver can easily be applied to the front of a flat panel display, cabinet or just about anywhere. <\/p>\n
Specifications
\nPower:\t+12VDC @ 25MA
\nMaximum recommended cable length:\t1000′ with CAT 5 cables
\nCarrier frequency acceptable range:\t30khz to 60khz
\nControl range:\t4′ to 40′ without speaker grille
\n2′ to 28′ with speaker grille
\n*Actual range depends on signal strength and ambient noise conditions.
\nControl angle:\t0+\/- 45\u00b0 off axis
\nDimension:\t0.68″ H x 2.55″ W x 0.39″ D<\/p>\n","protected":false},"featured_media":130951,"template":"","meta":{"_acf_changed":false,"inline_featured_image":false,"ep_exclude_from_search":false},"product_brand":[],"product_cat":[6016,6028],"product_tag":[],"class_list":{"0":"post-180417","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-speakers","7":"product_cat-surface-speakers","8":"pa_garantie-annees-1-en","9":"pa_marque-snap-av-en","10":"pa_quantite-par-paquet-1-unit","12":"first","13":"instock","14":"taxable","15":"shipping-taxable","16":"purchasable","17":"product-type-simple"},"acf":[],"yoast_head":"\n